CareOne Temple Touch Thermometer

Care
and cleaning instructions: Wipe the probe with an alcohol swab or a
cotton swab moistened with 70% isopropyl alchol before & after each
use After cleaning wait at least 2 minutes before taking a measurement
for the unit to readjust to room temperature. Use only a soft dry cloth
to clean the body of the thermometer (if necessary). Never use an
abrasive cleanser or submerge the thermometer in water or other liquids.
Do not expose the thermometer to extreme temperatures, humidity, direct
sunlight or shock. Store at room temperature. Quick start tips: 1.Press
and release the power button, wait 2-seconds. 2.Hold unit family to
temple until a long single beep is heard, 6-8 seconds. 3.Results will be
displayed on the screen. 4.Wait one minute before new measurement. 5.To
alternate between °F and °C, Press and hold the power button. Please
read these instructions carefully This product is not intended to
diagnose or treat any health problem or disease and should not be used
as a substitute for the consultation and advice of a physician or other
medical professional. Thermometers should only be used under the
supervision of an adult. Before use, it is recommended that the patient
avoid eating, drinking, smoking or exercising for at least twenty
minutes prior to talking a measurement. Never walk, run or talk during a
measurement. Normal body temperature/fever indicator: Body temperature
can vary from 97°F and 100.0°F and still be considered normal the
medically accepted normal body temperature is 98.6°F Body temperature is
commonly lower in the upon walking than at any point during the rest of
an individual’s walking hours. Temperature readings will vary based on
the body location point of the reading. Average ‘normal’ temperature
ranges by measurements location site: Forehead 97.0°F-100.0°F
(36.1°C-37.8°C) Oral 97.0°F-100.0°F (36.1°C-37.8°C) Rectal
97.3°F-100.4°F (36.3°C-38.0°C) Axillary 95.4°F-99.0°F
(35.2°C-37.2°C) A fever is defined as a body temperature that is
elevated above the normal or that person. It is important to determine
what is normal for an individual before determining. If a fever is
present. Tracking an individual’s temperature on a consistent basis, at
the same body site and at the same time everyday when the person is well
or healthy will help determine an individual’s normal temperature.
Guidelines for temple measurements This thermometer is designed to
measure the temperature at the forehead, in proximity to the temple area
between the end of the eyebrow and the hairline. Do not place the
thermometer on scar tissue, skin disorder, open sores or abrasions or
patients in trauma. Consult your physician when using drug therapies
that may elevate skin temperature in the forehead. Do not use skin
exposed to direct sunlight, fireplace heat, air conditioner or fan air
flow, or hot/cold compress therapies. Wait at least one minute between
measurements to allow the unit sensor to readjust to room temperature.
If the thermometer has been stored in an excessively cold or warm
environment, allow the thermometer to adjust to the ambient room
temperature before use. Performance and operation of this unit may be
compromised if operated outside of the specified temperature and
humidity operating ranges. Operating instructions: 1.Press and release
the power button to activate the thermometer. 2.The unit will beep and
the thermometer will perform a self-test, showing all the symbols on the
display. 3.The last measurement taken will shown on the display.
4.Gently place the probe in the center of the temple area between the
end of the eyebrow and the hairline. Maintain firm contact with the
skin, hold the thermometer to ensure reliable results. 5.Do not press
the power button again. The measurements will start automatically once
the probe is in place and will take approximately 6-8 seconds. A running
circle will appear on the display indicating the reading is in
progress. 6. The unit will sound one long beep when the measurement is
complete and the reading will appear on the display. 7. To turn the unit
off, simply press the power button. The unit will automatically
shut-off after approximately one minute. Note: if you take another
measurement before 1 minute has elapsed, the device will perform a 10 to
0 countdown to allow the device to reset for a new measurement. Do not
try to measure during this countdown. If you attempt to measure during
the countdown time, the device will display the previous result, beep 8
times and turn itself off automatically. Setting the operating scale or
°C. The device setting is by default Fahrenheit(°). To change the scale
to°C, or back to °F. 1.While off, press and hold the power button for 5
seconds, on the screen you will see the icon (°F,°C) Changes. 2. Release
the button, the hourglass icon will disappear in 5 seconds indicating
that the device is ready for use. Memory recall: This unit includes a
recall of the last measurement taken. When the unit is OFF, press the
power button to turn the unit on, and release. After the self-test, the
unit will briefly show the last reading on the display. Replacing the
battery. This thermometer includes 2 AAA 1.5V Batteries. The low-battery
symbol will appear on the top center of the display when the battery
needs to be changed. 1. Carefully slide the battery cap away from the
unit. 2. Replace the batteries, taking care to match the correct
polarity. 3. Carefully replace the battery cap. 4. Do not dispose of
used batteries in the trash. Consult your local recycling center for the
proper way to dispose the batteries in your area. Keep used batteries
away from children, pets and excessive heat. Troubleshooting/
Identifying display symbols Performance may be degraded should one or
more of the following occur: Operation outside stated temperature and
humidity range. Storage outside state temperature and humidity range.
Mechanical shock. Patient temperature is below ambient temperature. The
thermometer has been designed to display feedback-warnings to ensure
proper usage and accurate temperature measurement. When an error appears
the device will “beep” 5 times, and then the thermometer will turn off
automatically.

Warnings