DenTek Temparin Max, Long Lasting Temporary Repair, Caps & Fillings

Directions
to Replace a Lost Filling: Wash the cavity area with warm water and do
not dry. Cut with spade tool or pinch a small amount of Temparin Max
from the vial, and roll into a ball between fingers. Slightly overfill
the cavity with Temparin Max and pack into place with applicator tool
tip. Close your teeth together, as if you were biting down on a piece of
paper, and gently chew or grind on the replaced filling a couple times
to create a comfortable bite. Use a moist cotton swab to remove excess
Temparin Max from around the area. Moisture will accelerate the set.
Temparin Max will set softly in your mouth within a few minutes, but
avoid chewing on the repair for 2-3 hours to allow the material to fully
set.

Directions
to Secure Loose Crowns, Caps, or Inlays: Try the crown, cap, or inlay
first to see if you can fit it accurately back onto the tooth surface.
If you are not able to do so, or if remaining tooth is cracked, then do
not proceed further. If the crown has a post attached to it or if there
is tooth surface remaining inside the crown, Temparin Max may not
adhere. Carefully rinse the tooth area and the inside of the crown, cap,
or inlay with warm water, and do not dry. Cut with spade tool or pinch a
small amount of Temparin Max from the vial, roll into a ball between
fingers, and place evenly inside the crown, cap, or inlay. Place the
crown, cap, or inlay on the tooth and bite down, applying pressure to
push into position. Temparin Max will begin to harden within a few
minutes, but avoid chewing on the repair for at least 2-3 hours to allow
the material to set. Use a toothbrush to gently clear any excess
material from around the crown, cap, or inlay.

Warnings